Collections

Once again, we have made progress in development and we are happy to introduce a new model of the best gloves from 4SR. The Stingray Race Spec racing motorcycle gloves have been created with an emphasis on safety and maximum flexibility. 

Riders often prefer comfort and the feel of their fingers in the gloves over high-level protection, but we all know that this is not exactly ideal, and that is why we have focused on joining these conflicting demands.

The fingers controlling the levers have flexible panels built-in at the joint, which do not resist bending and thus enable sensitive touch control of the brakes and clutch. This reduces pressure on the tendons and minimizes the risk of cramps. The entire glove is anatomically pre-closed for better grip on the handlebars. For maximum comfort, external stitching is used.

The edge of the hand is sturdy, equipped with an Antishock system made of Viscofoam material with a memory effect. Because the pinky finger is hit in the vast majority of falls, it is conjoined to the ring finger to increase its protection.

The palm is usually the part of the glove that must resist abrasion well. Kevlar fibers and stingray skins are also used in the area of the palm. That is then backed by Viscofoam memory foam which protects the shuttle bone. The skeleton of the palm, including the fingers, is made of very fine Pittards leather, which is 2x more durable than kangaroo leather.

To protect the joints, it was necessary to develop a new protector made of flexible material and at the same time resistant to abrasion. The energy of the impact is distributed within the area and partially absorbed by the protector. Additional energy is absorbed by the Viscofoam layer below it. For the glove to fit properly, the dimensions of this protector correspond to the size of the glove

4SR racing gloves Stingray Race Spec Gray:

• full leather sport, motorcycle gloves designed for racing use
• The palm and shuttle bone protector is made of 100% stingray skin
• flexible panel to reduce pressure on the joints
• ergonomically shaped palm and fingers for better grip on the handlebars
• the use of external stitching guarantees driving comfort
• the conjoining of the pinky finger and ring finger reduces the risk of injury
• plastic protectors on joints and finger joints for greater safety
• Anti-shock system made of clever Viscofoam® foam on the wrist, joints, ridge, and finger joints ensures the
• distribution of energy during a fall and its subsequent mitigation
• inner lining made of DuPont-Kevlar® Kevlar fabric
• CE according to EU Regulation 2016/425 of the European Parliament and the Council

High-quality & very fine perforated gloves you will love to wear in summer.

Monster EVO gloves has undergone a design evolution. They have an extended cut in the wrist area, palm reinforcement and double leather overlay over the outside of your little finger. You can control your phone's screen using a thumb, which is made of touch screen leather.

4SR fully perforated biker gloves Monster Evo Brown:

• leather gloves made of waxed goatskin
• ergonomic shape of the fingers ensures better comfort for your hands
• thumb is made of touch screen leather
• reinforced palm
• knuckle protectors
• laser made decoration

Are you looking for a top-class racing suit to accommodate your standalone airbag vest? Then you’ve just found the best Airbag Ready® leathers on the market. Our latest specification Racing Diablo AR 1PC race suit comes with all the unique safety points you would expect from 4SR, but with our increased area of accordion stretch panel, this suit can now work safely in conjunction with any standalone airbag vest for racing.

Over the years we have been working with professional racers to develop the safest suits possible, this is our safest and most comfortable yet. Racing Diablo AR suit already comes with 18 ergonomically placed protectors and if you remove the 4SR Level 2 back and chest protectors, you can then wear your chosen airbag vest underneath. Easy and fast, you're now Airbag Ready!

Thanks to the unique cut and placement of accordion stretch panels, you can use several variants of standalone airbags available on the market. Our stitching and materials remain and will always remain 100% the same as our factory racers suits.

If you want to improve your motorcycle suit, leather jacket or trousers with leather logos, 4SR badging service is here for you!

The price includes knee and elbow sliders, internal protectors, removable chest and back protectors, double hip and coccyx protection and all from reputable brands. We have 18 ergonomically placed protectors, the most used in any mass-produced 1pc leather suit.

"WE MAKE OUR PRODUCTION SUITS IN THE SAME WAY WE PREPARE OUR FACTORY RACERS SUITS"

   We have also developed a simple and effective solution for holding up your leathers between track sessions, 4SR's Zipper Lock system will effectively hold the upper half of your suit out of the way.

The one-piece Racing Diablo AR Airbag Ready is also equipped with:

• Hollow hump to fit your Hydroback
• Seamless stretch in the crotch and armpit area for increased movement
• Flexible, comfortable material used on the sleeve cuffs
• Zipper lock to hold your leathers in between track sessions
• Elbow down TECH elbow sliders. Available in several colours - White, Black, Red, Fluorescent Red, Fluorescent Yellow and Green.

 

Standard equipment of the Racing Diablo AR Airbag Ready® includes:

• 1,2 mm thick cowhide / black, red, anthracite grey /
• 4SR Elbow down TECH - replaceable elbow sliders
• offset shoulders and pre-curved sleeves for the perfect riding position
• high specification Betac shoulder, elbows and knees, certificated in accordance with EN
• YKK & OPTI Zippers
• maximum perforation on chest area, local perforation on arms, hips and thighs
• 3D mesh lining
• Aramid stretch panels for maximum mobility
• flexible leather panels
• hollow aerodynamic hump to fit 4SR Hydrobag
• use of tripple seams & patented, double 4SR seam at more stressed points
• soft strech sleeve cuffs
• comfortable collar
• reflective logo on collar
• includes chest and back protectors (Both must be removed if using an Airbag system)
• includes knee sliders
• excludes Airbag system

• AR suit is compatible with In&motion airbag systems, Alpinestars Tech-Air®
• AR Airbag Ready® is a trademark registered in the Industrial Property Office of the Czech Republic
  
  

What does 4SR have and others don't?:

• The suit is fully equipped with racing protectors, including chest and back protectors
• Aramid stretch panel under the armpits and crotch is seamless
• Inside the suit you will find a hidden pocket for a LapTimer
• After closing the patent on the slider of the main zipper, the unzipped suit will not fall passed the butt 
• Areas prone to abrasion are connected by a patented, double 4SR seam, which is sewn 4x!
• 4SR suits have two layers of leather on the elbows, shoulders, hips and seating area
• 4SR leather was tested by the TÜV Rheinland® certification center according to the EN 13595-2: 2002 standard, where it withstood 11.2s in the abrasion resistance test. We received the Level 2 safety label for our leather.

Are you looking for a top-class racing suit to accommodate your standalone airbag vest? Then you’ve just found the best Airbag Ready® leathers on the market.

Our latest specification Power AR 1PC race suit comes with all the unique safety points you would expect from 4SR, but with our increased area of accordion stretch panel, this suit can now work safely in conjunction with any standalone airbag vest for racing.

Over the years we have been working with professional racers to develop the safest suits possible, this is our safest and most comfortable yet. Racing Power AR suit already comes with 18 ergonomically placed protectors and if you remove the 4SR Level 2 back and chest protectors, you can then wear your chosen airbag vest underneath. Easy and fast, you're now Airbag Ready!

Thanks to the unique cut and placement of accordion stretch panels, you can use several variants of standalone airbags available on the market. Our stitching and materials remain and will always remain 100% the same as our factory racers suits.

The price includes knee and elbow sliders, internal protectors, removable chest and back protectors, double hip and coccyx protection and all from reputable brands. We have 18 ergonomically placed protectors, the most used in any mass-produced 1pc leather suit.

"WE MAKE OUR PRODUCTION SUITS IN THE SAME WAY WE PREPARE OUR FACTORY RACERS SUITS"
 

   We have also developed a simple and effective solution for holding up your leathers between track sessions, 4SR's Zipper Lock system will effectively hold the upper half of your suit out of the way.

The one-piece Racing Power AR Airbag Ready is also equipped with:

• Hollow hump to fit your Camelbak rehydration pack
• Seamless stretch in the crotch and armpit area for increased movement
• Flexible, comfortable material used on the sleeve cuffs
• Zipper lock to hold your leathers in between track sessions
• Elbow down TECH elbow sliders. Available in several colors - Black, Red, Fluorescent Red, Fluorescent Yellow and Green.
   

Let the new 4SR Racing Power AR suit do the talking for you - As this suit states in print, you are a racer and have the Courage and Power to never give up - Racing is life, race to win!

 

Standard equipment of the Racing Power AR Airbag Ready® includes:

• 1,2 mm thick cowhide / black, white, gray /
• 4SR Elbow down TECH - replaceable elbow sliders
• Offset Shoulders and Pre-Curved Sleeves for the Perfect Riding Position
• High Specification Betac Shoulder, Elbow and Knee Pads (Certified according to EN 1621-1: 2012)
• YKK & OPTI Zippers
• Maximum Perforation on chest area, local perforation on arms, hips and thighs
• complete front perforation & local perforations underarm
• 3D mesh lining
• Kevlar stretch panels for maximum mobility
• flexible leather panels
• hollow aerodynamic hump to fit camelbak
• use of double seams at more stressed points
• soft kevlar sleeve cuffs
• comfortable collar
• reflective logo on collar
• includes chest and spine protectors (Both must be removed if using an Airbag system)
• includes knee sliders
• excluding Airbag system

• AR suit is compatible with In & motion airbag system, Alpinestars Tech-Air®,
• AR Airbag Ready® is a trademark registered in the Industrial Property Office of the Czech Republic
   

Once again, we have made progress in development and we are happy to introduce a new model of the best gloves from 4SR. The Stingray Race Spec racing motorcycle gloves have been created with an emphasis on safety and maximum flexibility. 

Riders often prefer comfort and the feel of their fingers in the gloves over high-level protection, but we all know that this is not exactly ideal, and that is why we have focused on joining these conflicting demands.

The fingers controlling the levers have flexible panels built-in at the joint, which do not resist bending and thus enable sensitive touch control of the brakes and clutch. This reduces pressure on the tendons and minimizes the risk of cramps. The entire glove is anatomically pre-closed for better grip on the handlebars. For maximum comfort, external stitching is used.

The edge of the hand is sturdy, equipped with an Antishock system made of Viscofoam material with a memory effect. Because the pinky finger is hit in the vast majority of falls, it is conjoined to the ring finger to increase its protection.

The palm is usually the part of the glove that must resist abrasion well. Kevlar fibers and stingray skins are also used in the area of the palm. That is then backed by Viscofoam memory foam which protects the shuttle bone. The skeleton of the palm, including the fingers, is made of very fine Pittards leather, which is 2x more durable than kangaroo leather.

To protect the joints, it was necessary to develop a new protector made of flexible material and at the same time resistant to abrasion. The energy of the impact is distributed within the area and partially absorbed by the protector. Additional energy is absorbed by the Viscofoam layer below it. For the glove to fit properly, the dimensions of this protector correspond to the size of the glove

4SR racing gloves Stingray Race Spec Yellow:

• full leather sport, motorcycle gloves designed for racing use
• The palm and shuttle bone protector is made of 100% stingray skin
• flexible panel to reduce pressure on the joints
• ergonomically shaped palm and fingers for better grip on the handlebars
• the use of external stitching guarantees driving comfort
• the conjoining of the pinky finger and ring finger reduces the risk of injury
• plastic protectors on joints and finger joints for greater safety
• Anti-shock system made of clever Viscofoam® foam on the wrist, joints, ridge, and finger joints ensures the
• distribution of energy during a fall and its subsequent mitigation
• inner lining made of DuPont-Kevlar® Kevlar fabric
• CE according to EU Regulation 2016/425 of the European Parliament and the Council

We know that in many situations wearing a full-fledged back protector can be impractical, so we decided to offer an appropriate solution. Thanks to the cooperation with European top designers of safety protectors, you can now buy insert back protectors for all 4SR jackets and suits from model year 2009. It´s made of elastic but strong Polyurethane. This material has a memory effect, which allows shaping to any form, it´s comfy and very effective. This protector can be easily inserted in the pocket in a jacket or a suit and your back is safe. 4SR back protector meets the highest protection requirements according to EN1621-2 Level 2 norm.

It is necessary to buy a protector, which size corresponds with the size of your jacket.
Beware of different types of older jackets and suits. You are advised to carefully check the shape of your pocket

Please note that we can't ship the suit to California.

A motorcycle suite made from kangaroo leather used to be a privilege for professional racers to wear. Its minimum weight was loved by riders who were slowly losing strength, as well as engineers who were increasing the maximum speed of the machine by tenths. You now have a chance to experience that feeling of lightness as well. We present you with the lightest suit in the 4SR collection.

Easy and fast, you're now Airbag Ready! Thanks to the unique cut and placement of accordion stretch panels, you can use several variants of standalone airbags available on the market. Our stitching and materials remain and will always remain 100% the same as our factory racers suits.

The price includes knee and elbow sliders, internal protectors, removable chest and back protectors, double hip and coccyx protection and all from reputable brands. We have 18 ergonomically placed protectors, the most used in any mass-produced 1pc leather suit.

"WE MAKE OUR PRODUCTION SUITS IN THE SAME WAY WE PREPARE OUR FACTORY RACERS SUITS"

We have also developed a simple and effective solution for holding up your leathers between track sessions, 4SR's Zipper Lock system will effectively hold the upper half of your suit out of the way.

The one-piece Racing Ultra Light AR is also equipped with:

• Hollow hump to fit 4SR Hydrobag
• Seamless stretch in the crotch and armpit area for increased movement
• Flexible, comfortable material used on the sleeve cuffs
• Zipper lock to hold your leathers in between track sessions
• Elbow down TECH elbow sliders. Available in several colours - White, Black, Red, Fluorescent Red, Fluorescent Yellow and Green.
  
  

Standard equipment of the Racing Ultra Light AR Airbag Ready® includes:

• 0,9 mm thick kangaroo leather / black, fluorescent red, grey /
• weight of the suit is 3,4 kg, weight with protectors including chest protector, back protector and sliders is 5,2 kg (size 48)
• 4SR Elbow down TECH - replaceable elbow sliders
• offset shoulders and pre-curved sleeves for the perfect riding position
• high specification Betac shoulder, elbows and knees, certificated in accordance with EN 1621-1: 2012
• YKK & OPTI Zippers
• maximum perforation on chest and back area, local perforation on arms, hips and thighs
• 3D bubble mesh lining
• Aramid stretch panels for maximum mobility
• flexible leather panels
• hollow aerodynamic hump to fit 4SR Hydrobag
• use of tripple seams & patented, double 4SR seam at more stressed points
• soft strech sleeve cuffs
• comfortable collar
• reflective logo on collar
• includes chest and back protectors (Both must be removed if using an Airbag system)
• includes knee sliders
• excludes Airbag system

• AR suit is compatible with In&motion airbag systems, Alpinestars Tech-Air®
• AR Airbag Ready® is a trademark registered in the Industrial Property Office of the Czech Republic
  
  

What does 4SR have and others don't?:

• The suit is fully equipped with racing protectors, including chest and back protectors
• Aramid stretch panel under the armpits and crotch is seamless
• Inside the suit you will find a hidden pocket for a LapTimer
• After closing the patent on the slider of the main zipper, the unzipped suit will not fall passed the butt 
• Areas prone to abrasion are connected by a patented, double 4SR seam, which is sewn 4x!
• 4SR suits have two layers of leather on the elbows, shoulders, hips and seating area
• 4SR leather was tested by the TÜV Rheinland® certification center according to the EN 13595-2: 2002 standard, where it withstood 11.2s in the abrasion resistance test. We received the Level 2 and safety label for our leather and AAA according to EN 17092.

The 4SR Baselayer Top Six-Pack Black is not only for motorsport but for any sport with high intensity.

4SR functional T-shirt Six-Pack Black:

• Material composition: 90% Polyester, 10% Elastane
• Men's functional T-shirt with long raglan sleeves
• Round neckline
• Stretch collar
• Extended back cut
• Maintains freedom of movement
• Excellent breathability
• Black color
• Packed in fabric packaging

• Baselayer Pants not included
• Model wears: size M

Once again, we have made progress in development and we are happy to introduce a new model of the best gloves from 4SR. The Stingray Race Spec racing motorcycle gloves have been created with an emphasis on safety and maximum flexibility. 

Riders often prefer comfort and the feel of their fingers in the gloves over high-level protection, but we all know that this is not exactly ideal, and that is why we have focused on joining these conflicting demands.

The fingers controlling the levers have flexible panels built-in at the joint, which do not resist bending and thus enable sensitive touch control of the brakes and clutch. This reduces pressure on the tendons and minimizes the risk of cramps. The entire glove is anatomically pre-closed for better grip on the handlebars. For maximum comfort, external stitching is used.

The edge of the hand is sturdy, equipped with an Antishock system made of Viscofoam material with a memory effect. Because the pinky finger is hit in the vast majority of falls, it is conjoined to the ring finger to increase its protection.

The palm is usually the part of the glove that must resist abrasion well. Kevlar fibers and stingray skins are also used in the area of the palm. That is then backed by Viscofoam memory foam which protects the shuttle bone. The skeleton of the palm, including the fingers, is made of very fine Pittards leather, which is 2x more durable than kangaroo leather.

To protect the joints, it was necessary to develop a new protector made of flexible material and at the same time resistant to abrasion. The energy of the impact is distributed within the area and partially absorbed by the protector. Additional energy is absorbed by the Viscofoam layer below it. For the glove to fit properly, the dimensions of this protector correspond to the size of the glove

4SR racing gloves Stingray Race Spec Camo:

• full leather sport, motorcycle gloves designed for racing use
• The palm and shuttle bone protector is made of 100% stingray skin
• flexible panel to reduce pressure on the joints
• ergonomically shaped palm and fingers for better grip on the handlebars
• the use of external stitching guarantees driving comfort
• the conjoining of the pinky finger and ring finger reduces the risk of injury
• plastic protectors on joints and finger joints for greater safety
• Anti-shock system made of clever Viscofoam® foam on the wrist, joints, ridge, and finger joints ensures the
• distribution of energy during a fall and its subsequent mitigation
• inner lining made of DuPont-Kevlar® Kevlar fabric
• CE according to EU Regulation 2016/425 of the European Parliament and the Council

Available in longer version. Pant is 4 inches longer.

Sporty Kevlar jeans that are properly fitted to maximize comfort and keep that sharp sports style and feel! These are the new Club Sport Gray jeans from the 4SR.

When developing the 4SR Club Sport Gray jeans, we have used our experience from World Superbikes technology, to ensure these sporty jeans, work in the same way as our racing Leathers, using flexible panels above the knees.

Flexible and elastic Kevlar® by DuPont, has been used to produce these jeans, to ensure maximized comfort and mobility while riding your motorcycle.

The 4SR Club Sport Gray Jeans also have ventilation that is strategically placed on the upper thighs, right next to the side pockets. The location of the ventilation on the upper thigh reduces the risk of injury from the zip for the wearer. For added safety, the vent is also covered with Kevlar, for extra protection.

Like any other garment we produce at 4SR, the Club Sport Jeans are equipped with quality knee protectors, which are of course to the highest level 2 T + certification and with the ergonomic 3D shape of the protector not only protects the knee but also the shin.

Thanks to the development of our professional riders along with our experience in the world of motorcycle and world championship motorcycle racing, we know that the right shape of the protector is one of the most important aspects.

4SR Jeans are still the only Kevlar jeans on the market that have the fixation of the guards in the right place and meet the highest standard requirements. 4SR have the patented AFS - Armor Fixation System.

How does the 4SR AFS work? The trousers have a loose elastic stocking that holds the knee and shin protector in place and is independent from the top layer of material. So you still have the protector in the right place, while enjoying the freedom and movement of safe Kevlar jeans.
Additionally, you can adjust the protector up and down to position them exactly where you feel most comfortable according to your height.

TESTED BY HUMANS

The article about patented system of knee protectors.

4SR kevlar motorcycle jeans Club Sport Gray:

• 14 ounce gray denim
• reinforced with DuPont™ Kevlar® fiber on the knees and hips
• high quality Safe Tech knee protectors, EN 1621-1: 2012 LEVEL 2 T+ certified, adjustable to fit your height. The protectors are fixed in our patented pocket that is found on no other type of motorcycle jeans!
• memory protectors Viscofoam on the hips
• anatomical design of knees
• flexible panels at the back area, covered with Kevlar® fibre by DuPont, for extra protection
• flexible panels above the knees, covered with Kevlar® fibre by DuPont, for extra protection
• ventilation placed on the upper thighs
• magnetic side pocket
• 4SR motorcycle jeans can be also equipped with certified hip protectors Sas-Tec
• zipper for connection with 4SR jackets
• textile bag packaging

Are you looking for a top-class racing suit to accommodate your standalone airbag vest? Then you’ve just found the best Airbag Ready® leathers on the market. Our latest specification Racing Camo AR 1PC race suit comes with all the unique safety points you would expect from 4SR, but with our increased area of accordion stretch panel, this suit can now work safely in conjunction with any standalone airbag vest for racing.

Over the years we have been working with professional racers to develop the safest suits possible, this is our safest and most comfortable yet. Racing Camo AR suit already comes with 18 ergonomically placed protectors and if you remove the 4SR Level 2 back and chest protectors, you can then wear your chosen airbag vest underneath. Easy and fast, you're now Airbag Ready!

Thanks to the unique cut and placement of accordion stretch panels, you can use several variants of standalone airbags available on the market. Our stitching and materials remain and will always remain 100% the same as our factory racers suits.

If you want to improve your motorcycle suit, leather jacket or trousers with leather logos, 4SR badging service is here for you!

The price includes knee and elbow sliders, internal protectors, removable chest and back protectors, double hip and coccyx protection and all from reputable brands. We have 18 ergonomically placed protectors, the most used in any mass-produced 1pc leather suit.

"WE MAKE OUR PRODUCTION SUITS IN THE SAME WAY WE PREPARE OUR FACTORY RACERS SUITS"

   We have also developed a simple and effective solution for holding up your leathers between track sessions, 4SR's Zipper Lock system will effectively hold the upper half of your suit out of the way.

The one-piece Racing Camo AR Airbag Ready is also equipped with:

• Hollow hump to fit your Hydroback
• Seamless stretch in the crotch and armpit area for increased movement
• Flexible, comfortable material used on the sleeve cuffs
• Zipper lock to hold your leathers in between track sessions
• Elbow down TECH elbow sliders. Available in several colours - White, Black, Red, Fluorescent Red, Fluorescent Yellow and Green.

 

Standard equipment of the Racing Camo AR Airbag Ready® includes:

• 1,2 mm thick cowhide / black, fluo red, fluo yellow /
• 4SR Elbow down TECH - replaceable elbow sliders
• offset shoulders and pre-curved sleeves for the perfect riding position
• high specification Betac shoulder, elbows and knees, certificated in accordance with EN
• YKK & OPTI Zippers
• maximum perforation on chest area, local perforation on arms, hips and thighs
• 3D mesh lining
• Aramid stretch panels for maximum mobility
• flexible leather panels
• hollow aerodynamic hump to fit 4SR Hydrobag
• use of tripple seams & patented, double 4SR seam at more stressed points
• soft strech sleeve cuffs
• comfortable collar
• reflective logo on collar
• includes chest and back protectors (Both must be removed if using an Airbag system)
• includes knee sliders
• excludes Airbag system

• AR suit is compatible with In&motion airbag systems, Alpinestars Tech-Air®
• AR Airbag Ready® is a trademark registered in the Industrial Property Office of the Czech Republic
  
  

What does 4SR have and others don't?:

• The suit is fully equipped with racing protectors, including chest and back protectors
• Aramid stretch panel under the armpits and crotch is seamless
• Inside the suit you will find a hidden pocket for a LapTimer
• After closing the patent on the slider of the main zipper, the unzipped suit will not fall passed the butt 
• Areas prone to abrasion are connected by a patented, double 4SR seam, which is sewn 4x!
• 4SR suits have two layers of leather on the elbows, shoulders, hips and seating area
• 4SR leather was tested by the TÜV Rheinland® certification center according to the EN 13595-2: 2002 standard, where it withstood 11.2s in the abrasion resistance test. We received the Level 2 safety label for our leather.

The Hooligan jacket is designed for all hooligans who know that a good quality leather jacket must be made from the best, selective leather.

Premium buffalo leather with perforated brown stripes. This carefully crafted jacket has been constructed using market leading Level 2 T+ protection from Safe Tech.

4SR motorcycle leather jacket Hooligan Brown:

• 1,2 mm cowhide leather
• metal YKK zippers
• high quality protectors Safe Tech on the shoulders and elbows, certificated in accordance with EN 1621-1:2012 Level 2 T+
• all protectors are completely detachable
• ergonomic shape, longer back part
• local perforations allow ventilation on hot summer days
• with luxury detachable thermo-lining in brown colour
• hand-brushed details
• two outside pockets and three inside pockets
  
  
• jacket can be also equipped with certified back protector Sas-Tec
• connection with leather trousers and jeans through long and short zipper

We are happy to introduce a new model of Sport Cup Gloves! The emphasis as always was on safety, so we went the next level when choosing materials, protectors and creating the pre-curved shape. 

If you want comfortable gloves with protective padding and great fit, Sport Cup 3 will be your favourite pair in your closet! Our Sport Cup 3 Yellow glove has a pre-curved shape to give the rider a perfect feeling on the handlebars and reduces the problem of blistering hands.

4SR motorbike gloves Sport Cup 3 Yellow:

• leather sport gloves made of goatskin & cowhide
• precurved sport design
• local perforations between fingers
• ergonomic shape of the fingers ensures better comfort for your hands
• double overlay over the outside of your little finger and ring finger
• plastic joint protector
• Poreten knuckle protectors
• reinforced palms with extreme protective fabric Schoeller®-Keprotec
• double fastening ensures the glove stays in place if you happen to fall
  

The 4SR Baselayer Pants Six-Pack Black is not only for motorsport but for any sport with high intensity.

4SR Baselayer Pants Six-Pack Black:

• Material composition: 90% Polyester, 10% Elastane
• Men's functional Pants
• Stretch waistband (4,3cm)
• Maintains freedom of movement
• Excellent breathability
• Local perforations below knees
• Black color
• Packed in fabric packaging

• Baselayer Top not included
• Model wears: size M

Sporty Kevlar jeans that are properly fitted to maximize comfort and keep that sharp sports style and feel! These are the new Club Sport jeans from the 4SR.

When developing the 4SR Club Sport jeans, we have used our experience from World Superbikes technology, to ensure these sporty jeans, work in the same way as our racing Leathers, using flexible panels above the knees.

Flexible and elastic Kevlar® by DuPont, has been used to produce these jeans, to ensure maximized comfort and mobility while riding your motorcycle.

The 4SR Club Sport Jeans also have ventilation that is strategically placed on the upper thighs, right next to the side pockets. The location of the ventilation on the upper thigh reduces the risk of injury from the zip for the wearer. For added safety, the vent is also covered with Kevlar, for extra protection.

Like any other garment we produce at 4SR, the Club Sport Jeans are equipped with quality knee protectors, which are of course to the highest level 2 T + certification and with the ergonomic 3D shape of the protector not only protects the knee but also the shin.

Thanks to the development of our professional riders along with our experience in the world of motorcycle and world championship motorcycle racing, we know that the right shape of the protector is one of the most important aspects.

4SR Jeans are still the only Kevlar jeans on the market that have the fixation of the guards in the right place and meet the highest standard requirements. 4SR have the patented AFS - Armor Fixation System.

How does the 4SR AFS work? The trousers have a loose elastic stocking that holds the knee and shin protector in place and is independent from the top layer of material. So you still have the protector in the right place, while enjoying the freedom and movement of safe Kevlar jeans.
Additionally, you can adjust the protector up and down to position them exactly where you feel most comfortable according to your height.

TESTED BY HUMANS

The article about patented system of knee protectors.

4SR kevlar motorcycle jeans Club Sport Sky Black:

• 14 ounce Sky Black denim
• reinforced with DuPont™ Kevlar® fiber on the knees and hips
• high quality Safe Tech knee protectors, EN 1621-1: 2012 LEVEL 2 T+ certified, adjustable to fit your height. The protectors are fixed in our patented pocket that is found on no other type of motorcycle jeans!
• memory protectors Viscofoam on the hips
• anatomical design of knees
• flexible panels at the back area, covered with Kevlar® fibre by DuPont, for extra protection
• flexible panels above the knees, covered with Kevlar® fibre by DuPont, for extra protection
• ventilation placed on the upper thighs
• magnetic side pocket
• 4SR motorcycle jeans can be also equipped with certified hip protectors Sas-Tec
• zipper for connection with 4SR jackets
• textile bag packaging

Are you looking for a top-class racing suit to accommodate your standalone airbag vest? Then you’ve just found the best Airbag Ready® leathers on the market.

Our latest specification Neon AR 1PC race suit comes with all the unique safety points you would expect from 4SR, but with our increased area of accordion stretch panel, this suit can now work safely in conjunction with any standalone airbag vest for racing.

Over the years we have been working with professional racers to develop the safest suits possible, this is our safest and most comfortable yet. Racing Neon AR suit already comes with 18 ergonomically placed protectors and if you remove the 4SR Level 2 back and chest protectors, you can then wear your chosen airbag vest underneath. Easy and fast, you're now Airbag Ready!

Thanks to the unique cut and placement of accordion stretch panels, you can use several variants of standalone airbags available on the market. Our stitching and materials remain and will always remain 100% the same as our factory racers suits.

The price includes knee and elbow sliders, internal protectors, removable chest and back protectors, double hip and coccyx protection and all from reputable brands. We have 18 ergonomically placed protectors, the most used in any mass-produced 1pc leather suit.

"WE MAKE OUR PRODUCTION SUITS IN THE SAME WAY WE PREPARE OUR FACTORY RACERS SUITS"
 

   We have also developed a simple and effective solution for holding up your leathers between track sessions, 4SR's Zipper Lock system will effectively hold the upper half of your suit out of the way.

The one-piece Racing Neon AR Airbag Ready is also equipped with:

• Hollow hump to fit your Camelbak rehydration pack
• Seamless stretch in the crotch and armpit area for increased movement
• Flexible, comfortable material used on the sleeve cuffs
• Zipper lock to hold your leathers in between track sessions
• Elbow down TECH elbow sliders. Available in several colors - Black, Red, Fluorescent Red, Fluorescent Yellow and Green.
   

Standard equipment of the Racing Neon AR Airbag Ready® includes:

• 1,2 mm thick cowhide / black, Fluorescent Yellow, Fluorescent Red /
• 4SR Elbow down TECH - replaceable elbow sliders
• Offset Shoulders and Pre-Curved Sleeves for the Perfect Riding Position
• High Specification Betac Shoulder, Elbow and Knee Pads (Certified according to EN 1621-1: 2012)
• YKK & OPTI Zippers
• Maximum Perforation on chest area, local perforation on arms, hips and thighs
• complete front perforation & local perforations underarm
• 3D mesh lining
• Kevlar stretch panels for maximum mobility
• flexible leather panels
• hollow aerodynamic hump to fit camelbak
• use of double seams at more stressed points
• soft kevlar sleeve cuffs
• comfortable collar
• reflective logo on collar
• includes chest and spine protectors (Both must be removed if using an Airbag system)
• includes knee sliders
• excluding Airbag system

• AR suit is compatible with In & motion airbag system, Alpinestars Tech-Air®,
• AR Airbag Ready® is a trademark registered in the Industrial Property Office of the Czech Republic
  

NEW IN - XS Size - suitable for women

High quality comfortable gloves, safe for sports riding. Manufactured with great emphasis on comfort, especially for racing use.

Our biggest development from the previous 4SR race glove, is the use of extreme protective fabric Schoeller®-Keprotec to protect the scaphoid area. Our superbike glove has a pre-curved shape to give the rider a perfect feeling on the handlebars and reduces the problem of blistering hands. Another improved safety feature is leather connection between the riders ring finger & little finger, a delicate area that is prone to damage during a crash.

4SR motorbike gloves Sport Cup Plus Yellow:

• leather sport gloves made of goatskin / black, fluorescent yellow /
• precurved sports design
• ergonomic shape of the fingers ensures better comfort for your hands
• outer seams ensure comfortable wear
• little finger and ring finger are joined to reduce the risk of injury
• carbon joint protector
• Poreten knuckle protectors
• reinforced palms with extreme protective fabric Schoeller®-Keprotec
• double fastening ensures the glove stays in place if you happen to fall

Because we understand the everyday needs of a biker who has to be resistant to wind & rain we have developed the BK 2 textile trousers.

The loose fit and flexible panels above the knees won’t be restricting your movement in any way, with Level 2 T+ protection from Safe Tech, can be zipped directly to 4SR range of textile or leather jackets.

4SR textile motorcycle trousers BK 2:

• High-strength textile material Nylon 600
• YKK zippers
• high quality Safe Tech knee protectors, EN 1621-1: 2012 LEVEL 2 T+ certified, adjustable to fit your height.
• memory protectors on the hips
• all protectors are completely detachable
• accordion stretch panels helps movement and comfort
• complete detachable thermo-lining
• internal waterproof membrane
• extended air-intakes
• velcro fly fastening
• variable waist
• reflective straps
• two outside pockets
• connection with jackets through long and short zipper

Sporty Kevlar jeans that are properly fitted to maximize comfort and keep that sharp sports style and feel! These are the new Club Sport jeans from the 4SR.

When developing the 4SR Club Sport jeans, we have used our experience from World Superbikes technology, to ensure these sporty jeans, work in the same way as our racing Leathers, using flexible panels above the knees.

Flexible and elastic Kevlar® by DuPont, has been used to produce these jeans, to ensure maximized comfort and mobility while riding your motorcycle.

The 4SR Club Sport Jeans also have ventilation that is strategically placed on the upper thighs, right next to the side pockets. The location of the ventilation on the upper thigh reduces the risk of injury from the zip for the wearer. For added safety, the vent is also covered with Kevlar, for extra protection.

Like any other garment we produce at 4SR, the Club Sport Jeans are equipped with quality knee protectors, which are of course to the highest level 2 T + certification and with the ergonomic 3D shape of the protector not only protects the knee but also the shin.

Thanks to the development of our professional riders along with our experience in the world of motorcycle and world championship motorcycle racing, we know that the right shape of the protector is one of the most important aspects.

4SR Jeans are still the only Kevlar jeans on the market that have the fixation of the guards in the right place and meet the highest standard requirements. 4SR have the patented AFS - Armor Fixation System.

How does the 4SR AFS work? The trousers have a loose elastic stocking that holds the knee and shin protector in place and is independent from the top layer of material. So you still have the protector in the right place, while enjoying the freedom and movement of safe Kevlar jeans.
Additionally, you can adjust the protector up and down to position them exactly where you feel most comfortable according to your height.

TESTED BY HUMANS

The article about patented system of knee protectors.

4SR kevlar motorcycle jeans Club Sport:

• 14 ounce blue denim
• reinforced with DuPont™ Kevlar® fiber on the knees and hips
• high quality Safe Tech knee protectors, EN 1621-1: 2012 LEVEL 2 T+ certified, adjustable to fit your height. The protectors are fixed in our patented pocket that is found on no other type of motorcycle jeans!
• memory protectors Viscofoam on the hips
• anatomical design of knees
• flexible panels at the back area, covered with Kevlar® fibre by DuPont, for extra protection
• flexible panels above the knees, covered with Kevlar® fibre by DuPont, for extra protection
• ventilation placed on the upper thighs
• magnetic side pocket
• 4SR motorcycle jeans can be also equipped with certified hip protectors Sas-Tec
• zipper for connection with 4SR jackets
• textile bag packaging

Your favorite Jeans Lady Star in Gray color! These are ladies biker jeans made with love.

These motorcycle jeans are made of 14 ounce denim reinforced with DuPont™ Kevlar® fiber around the knees and the backside. They feature adjustable cutting-edge Safe Tech knee protectors fixed in our patented pockets. The pockets keep the protectors tight around the knees whilst allowing for a comfortable width of the trousers. Viscofoam (memory foam) protectors on both sides provide protection over the hips. Jeans Lady Star have ladies cut, low waist, anatomically shaped knees and latest design.

TESTED BY HUMANS

The article about patented system of knee protectors.

4SR biker Jeans Lady Star Gray:

• 14 ounce grey denim
• reinforced with DuPont™ Kevlar® fiber on the knees and hips
• high quality Safe Tech knee protectors, EN 1621-1: 2012 LEVEL 2 certified, adjustable to fit your height. The protectors are fixed in our patented pocket that is found on no other type of motorcycle jeans!
• memory protectors Viscofoam on the hips
• anatomical design of knees
• new ladies cut
• 4SR motorcycle jeans can be also equipped with certified hip protectors Sas-Tec
• zipper for connection with 4SR jackets
• textile bag packaging

Thanks to our collaboration with the European leader in the field of safety protectors, we have prepared an ultra-light spine guard that meets the highest EN 1621-2: 2014 LEVEL 2 certification standard!

Thanks to its multi-layer composition, it retains its damping properties even in repeated impacts.

The Ultra Light Level 2 racing back protector was tested and developed with Jakub Smrz during the British Superbike Championship season, with its very light weight, comfortable shape and long length, the protector is designed for the extreme racing environment but can also be used comfortably in day to day riding.

 

4SR back protector Racing Ultra Light Level 2:

• light, multilayer polyurethane
• breathable, cloth cover
• designed to maintain maximum mobility
• residual force transmitted by the protector is only 5.5kN
• tried and tested at the race track
• adjustable waist belt
• adjustable elastic straps

• in sale in sizes S, M, L
• weighing only 14.8 oz (S), 16.5 oz (M), 19.9 oz (L)
• width of the pulling belt: 4 inches
• width of elastic straps: 1.2 inches

Textile jacket RTX Red provides great protection against all weather conditions. Manufactured with a high quality waterproof membrane and removable thermal liner to take on cold and wet weather.

Included in the purchase price, we have included our 4SR Bomber Liner Under-Jacket, which fits perfectly underneath this stylish jacket so that you can stay warm and comfortable for longer. We've designed our Bomber Liner to be worn as a stand-alone jacket as well, so you can add it to your everyday line-up.

To achieve the perfect fit and level of safety, our 4SR RTX Red jack