Gloves

Once again, we have made progress in development and we are happy to introduce a new model of the best gloves from 4SR. The Stingray Race Spec racing motorcycle gloves have been created with an emphasis on safety and maximum flexibility. 

Riders often prefer comfort and the feel of their fingers in the gloves over high-level protection, but we all know that this is not exactly ideal, and that is why we have focused on joining these conflicting demands.

The fingers controlling the levers have flexible panels built-in at the joint, which do not resist bending and thus enable sensitive touch control of the brakes and clutch. This reduces pressure on the tendons and minimizes the risk of cramps. The entire glove is anatomically pre-closed for better grip on the handlebars. For maximum comfort, external stitching is used.

The edge of the hand is sturdy, equipped with an Antishock system made of Viscofoam material with a memory effect. Because the pinky finger is hit in the vast majority of falls, it is conjoined to the ring finger to increase its protection.

The palm is usually the part of the glove that must resist abrasion well. Kevlar fibers and stingray skins are also used in the area of the palm. That is then backed by Viscofoam memory foam which protects the shuttle bone. The skeleton of the palm, including the fingers, is made of very fine Pittards leather, which is 2x more durable than kangaroo leather.

To protect the joints, it was necessary to develop a new protector made of flexible material and at the same time resistant to abrasion. The energy of the impact is distributed within the area and partially absorbed by the protector. Additional energy is absorbed by the Viscofoam layer below it. For the glove to fit properly, the dimensions of this protector correspond to the size of the glove

4SR racing gloves Stingray Race Spec Gray:

• full leather sport, motorcycle gloves designed for racing use
• The palm and shuttle bone protector is made of 100% stingray skin
• flexible panel to reduce pressure on the joints
• ergonomically shaped palm and fingers for better grip on the handlebars
• the use of external stitching guarantees driving comfort
• the conjoining of the pinky finger and ring finger reduces the risk of injury
• plastic protectors on joints and finger joints for greater safety
• Anti-shock system made of clever Viscofoam® foam on the wrist, joints, ridge, and finger joints ensures the
• distribution of energy during a fall and its subsequent mitigation
• inner lining made of DuPont-Kevlar® Kevlar fabric
• CE according to EU Regulation 2016/425 of the European Parliament and the Council

Once again, we have made progress in development and we are happy to introduce a new model of the best gloves from 4SR. The Stingray Race Spec racing motorcycle gloves have been created with an emphasis on safety and maximum flexibility. 

Riders often prefer comfort and the feel of their fingers in the gloves over high-level protection, but we all know that this is not exactly ideal, and that is why we have focused on joining these conflicting demands.

The fingers controlling the levers have flexible panels built-in at the joint, which do not resist bending and thus enable sensitive touch control of the brakes and clutch. This reduces pressure on the tendons and minimizes the risk of cramps. The entire glove is anatomically pre-closed for better grip on the handlebars. For maximum comfort, external stitching is used.

The edge of the hand is sturdy, equipped with an Antishock system made of Viscofoam material with a memory effect. Because the pinky finger is hit in the vast majority of falls, it is conjoined to the ring finger to increase its protection.

The palm is usually the part of the glove that must resist abrasion well. Kevlar fibers and stingray skins are also used in the area of the palm. That is then backed by Viscofoam memory foam which protects the shuttle bone. The skeleton of the palm, including the fingers, is made of very fine Pittards leather, which is 2x more durable than kangaroo leather.

To protect the joints, it was necessary to develop a new protector made of flexible material and at the same time resistant to abrasion. The energy of the impact is distributed within the area and partially absorbed by the protector. Additional energy is absorbed by the Viscofoam layer below it. For the glove to fit properly, the dimensions of this protector correspond to the size of the glove

4SR racing gloves Stingray Race Spec Yellow:

• full leather sport, motorcycle gloves designed for racing use
• The palm and shuttle bone protector is made of 100% stingray skin
• flexible panel to reduce pressure on the joints
• ergonomically shaped palm and fingers for better grip on the handlebars
• the use of external stitching guarantees driving comfort
• the conjoining of the pinky finger and ring finger reduces the risk of injury
• plastic protectors on joints and finger joints for greater safety
• Anti-shock system made of clever Viscofoam® foam on the wrist, joints, ridge, and finger joints ensures the
• distribution of energy during a fall and its subsequent mitigation
• inner lining made of DuPont-Kevlar® Kevlar fabric
• CE according to EU Regulation 2016/425 of the European Parliament and the Council

Once again, we have made progress in development and we are happy to introduce a new model of the best gloves from 4SR. The Stingray Race Spec racing motorcycle gloves have been created with an emphasis on safety and maximum flexibility. 

Riders often prefer comfort and the feel of their fingers in the gloves over high-level protection, but we all know that this is not exactly ideal, and that is why we have focused on joining these conflicting demands.

The fingers controlling the levers have flexible panels built-in at the joint, which do not resist bending and thus enable sensitive touch control of the brakes and clutch. This reduces pressure on the tendons and minimizes the risk of cramps. The entire glove is anatomically pre-closed for better grip on the handlebars. For maximum comfort, external stitching is used.

The edge of the hand is sturdy, equipped with an Antishock system made of Viscofoam material with a memory effect. Because the pinky finger is hit in the vast majority of falls, it is conjoined to the ring finger to increase its protection.

The palm is usually the part of the glove that must resist abrasion well. Kevlar fibers and stingray skins are also used in the area of the palm. That is then backed by Viscofoam memory foam which protects the shuttle bone. The skeleton of the palm, including the fingers, is made of very fine Pittards leather, which is 2x more durable than kangaroo leather.

To protect the joints, it was necessary to develop a new protector made of flexible material and at the same time resistant to abrasion. The energy of the impact is distributed within the area and partially absorbed by the protector. Additional energy is absorbed by the Viscofoam layer below it. For the glove to fit properly, the dimensions of this protector correspond to the size of the glove

4SR racing gloves Stingray Race Spec Camo:

• full leather sport, motorcycle gloves designed for racing use
• The palm and shuttle bone protector is made of 100% stingray skin
• flexible panel to reduce pressure on the joints
• ergonomically shaped palm and fingers for better grip on the handlebars
• the use of external stitching guarantees driving comfort
• the conjoining of the pinky finger and ring finger reduces the risk of injury
• plastic protectors on joints and finger joints for greater safety
• Anti-shock system made of clever Viscofoam® foam on the wrist, joints, ridge, and finger joints ensures the
• distribution of energy during a fall and its subsequent mitigation
• inner lining made of DuPont-Kevlar® Kevlar fabric
• CE according to EU Regulation 2016/425 of the European Parliament and the Council

Once again, we have made progress in development and we are happy to introduce a new model of the best gloves from 4SR. The Stingray Race Spec racing motorcycle gloves have been created with an emphasis on safety and maximum flexibility. 

Riders often prefer comfort and the feel of their fingers in the gloves over high-level protection, but we all know that this is not exactly ideal, and that is why we have focused on joining these conflicting demands.

The fingers controlling the levers have flexible panels built-in at the joint, which do not resist bending and thus enable sensitive touch control of the brakes and clutch. This reduces pressure on the tendons and minimizes the risk of cramps. The entire glove is anatomically pre-closed for better grip on the handlebars. For maximum comfort, external stitching is used.

The edge of the hand is sturdy, equipped with an Antishock system made of Viscofoam material with a memory effect. Because the pinky finger is hit in the vast majority of falls, it is conjoined to the ring finger to increase its protection.

The palm is usually the part of the glove that must resist abrasion well. Kevlar fibers and stingray skins are also used in the area of the palm. That is then backed by Viscofoam memory foam which protects the shuttle bone. The skeleton of the palm, including the fingers, is made of very fine Pittards leather, which is 2x more durable than kangaroo leather.

To protect the joints, it was necessary to develop a new protector made of flexible material and at the same time resistant to abrasion. The energy of the impact is distributed within the area and partially absorbed by the protector. Additional energy is absorbed by the Viscofoam layer below it. For the glove to fit properly, the dimensions of this protector correspond to the size of the glove

4SR racing gloves Stingray Race Spec Blue:

• full leather sport, motorcycle gloves designed for racing use
• The palm and shuttle bone protector is made of 100% stingray skin
• flexible panel to reduce pressure on the joints
• ergonomically shaped palm and fingers for better grip on the handlebars
• the use of external stitching guarantees driving comfort
• the conjoining of the pinky finger and ring finger reduces the risk of injury
• plastic protectors on joints and finger joints for greater safety
• Anti-shock system made of clever Viscofoam® foam on the wrist, joints, ridge, and finger joints ensures the
• distribution of energy during a fall and its subsequent mitigation
• inner lining made of DuPont-Kevlar® Kevlar fabric
• CE according to EU Regulation 2016/425 of the European Parliament and the Council

Fully perforated brown gloves made exclusively for women!

The Monster Lady Brown gloves are included in the urban collection of the same name. They are good-quality, very fine perforated gloves you will love to wear in summer.

4SR perforated summer ladies gloves Monster Lady Brown:

• leather gloves made of hand-waxed goatskin
• ergonomic shape of the fingers ensures better comfort for your hands
• reinforced palm
• knuckle protectors
• laser made decoration

Monster Lady gloves made exclusively for women!

The Monster gloves are included in the urban collection of the same name. They are good-quality 4SR perforated summer ladies gloves.

4SR Monster Lady:

• leather gloves made of goatskin
• ergonomic shape of the fingers ensures better comfort for your hands
• reinforced palm
• knuckle protectors
• laser made decoration

NEW IN - XS Size - suitable for women

High quality comfortable gloves, safe for sports riding. Manufactured with great emphasis on comfort, especially for racing use.

Our biggest development from the previous 4SR race glove, is the use of extreme protective fabric Schoeller®-Keprotec to protect the scaphoid area. Our superbike glove has a pre-curved shape to give the rider a perfect feeling on the handlebars and reduces the problem of blistering hands. Another improved safety feature is leather connection between the riders ring finger & little finger, a delicate area that is prone to damage during a crash.

• leather sport gloves made of goatskin / black /
• precurved sports design
• ergonomic shape of the fingers ensures better comfort for your hands
• outer seams ensure comfortable wear
• little finger and ring finger are joined to reduce the risk of injury
• carbon joint protector
• Poreten knuckle protectors
• reinforced palms with extreme protective fabric Schoeller®-Keprotec
• double fastening ensures the glove stays in place if you happen to fall

NEW IN - XS Size - suitable for women

High quality comfortable gloves, safe for sports riding. Manufactured with great emphasis on comfort, especially for racing use.

Our biggest development from the previous 4SR race glove, is the use of extreme protective fabric Schoeller®-Keprotec to protect the scaphoid area. Our superbike glove has a pre-curved shape to give the rider a perfect feeling on the handlebars and reduces the problem of blistering hands. Another improved safety feature is leather connection between the riders ring finger & little finger, a delicate area that is prone to damage during a crash.

4SR motorbike gloves Sport Cup Plus Yellow:

• leather sport gloves made of goatskin / black, fluorescent yellow /
• precurved sports design
• ergonomic shape of the fingers ensures better comfort for your hands
• outer seams ensure comfortable wear
• little finger and ring finger are joined to reduce the risk of injury
• carbon joint protector
• Poreten knuckle protectors
• reinforced palms with extreme protective fabric Schoeller®-Keprotec
• double fastening ensures the glove stays in place if you happen to fall

NEW IN - XS Size - suitable for women

High quality comfortable gloves, safe for sports riding. Manufactured with great emphasis on comfort, especially for racing use.

Our biggest development from the previous 4SR race glove, is the use of extreme protective fabric Schoeller®-Keprotec to protect the scaphoid area. Our superbike glove has a pre-curved shape to give the rider a perfect feeling on the handlebars and reduces the problem of blistering hands. Another improved safety feature is leather connection between the riders ring finger & little finger, a delicate area that is prone to damage during a crash.

• leather sport gloves made of goatskin / black, white, red /
• precurved sports design
• ergonomic shape of the fingers ensures better comfort for your hands
• outer seams ensure comfortable wear
• little finger and ring finger are joined to reduce the risk of injury
• carbon joint protector
• Poreten knuckle protectors
• reinforced palms with extreme protective fabric Schoeller®-Keprotec
• double fastening ensures the glove stays in place if you happen to fall

Gloves made exclusively for women.

Perfect model for those who need comfort, quality and style.

4SR ladies biker gloves SG Lady Black:

• leather gloves made of goatskin
• ergonomic shape of the fingers ensures better comfort for your hands
• double overlay over the outside of your little finger
• knuckle protectors made of a Poreten
• laser made decoration