Gloves

Once again, we have made progress in development and we are happy to introduce a new model of the best gloves from 4SR. The Stingray Race Spec racing motorcycle gloves have been created with an emphasis on safety and maximum flexibility. 

Riders often prefer comfort and the feel of their fingers in the gloves over high-level protection, but we all know that this is not exactly ideal, and that is why we have focused on joining these conflicting demands.

The fingers controlling the levers have flexible panels built-in at the joint, which do not resist bending and thus enable sensitive touch control of the brakes and clutch. This reduces pressure on the tendons and minimizes the risk of cramps. The entire glove is anatomically pre-closed for better grip on the handlebars. For maximum comfort, external stitching is used.

The edge of the hand is sturdy, equipped with an Antishock system made of Viscofoam material with a memory effect. Because the pinky finger is hit in the vast majority of falls, it is conjoined to the ring finger to increase its protection.

The palm is usually the part of the glove that must resist abrasion well. Kevlar fibers and stingray skins are also used in the area of the palm. That is then backed by Viscofoam memory foam which protects the shuttle bone. The skeleton of the palm, including the fingers, is made of very fine Pittards leather, which is 2x more durable than kangaroo leather.

To protect the joints, it was necessary to develop a new protector made of flexible material and at the same time resistant to abrasion. The energy of the impact is distributed within the area and partially absorbed by the protector. Additional energy is absorbed by the Viscofoam layer below it. For the glove to fit properly, the dimensions of this protector correspond to the size of the glove

4SR racing gloves Stingray Race Spec Gray:

• full leather sport, motorcycle gloves designed for racing use
• The palm and shuttle bone protector is made of 100% stingray skin
• flexible panel to reduce pressure on the joints
• ergonomically shaped palm and fingers for better grip on the handlebars
• the use of external stitching guarantees driving comfort
• the conjoining of the pinky finger and ring finger reduces the risk of injury
• plastic protectors on joints and finger joints for greater safety
• Anti-shock system made of clever Viscofoam® foam on the wrist, joints, ridge, and finger joints ensures the
• distribution of energy during a fall and its subsequent mitigation
• inner lining made of DuPont-Kevlar® Kevlar fabric
• CE according to EU Regulation 2016/425 of the European Parliament and the Council

Once again, we have made progress in development and we are happy to introduce a new model of the best gloves from 4SR. The Stingray Race Spec racing motorcycle gloves have been created with an emphasis on safety and maximum flexibility. 

Riders often prefer comfort and the feel of their fingers in the gloves over high-level protection, but we all know that this is not exactly ideal, and that is why we have focused on joining these conflicting demands.

The fingers controlling the levers have flexible panels built-in at the joint, which do not resist bending and thus enable sensitive touch control of the brakes and clutch. This reduces pressure on the tendons and minimizes the risk of cramps. The entire glove is anatomically pre-closed for better grip on the handlebars. For maximum comfort, external stitching is used.

The edge of the hand is sturdy, equipped with an Antishock system made of Viscofoam material with a memory effect. Because the pinky finger is hit in the vast majority of falls, it is conjoined to the ring finger to increase its protection.

The palm is usually the part of the glove that must resist abrasion well. Kevlar fibers and stingray skins are also used in the area of the palm. That is then backed by Viscofoam memory foam which protects the shuttle bone. The skeleton of the palm, including the fingers, is made of very fine Pittards leather, which is 2x more durable than kangaroo leather.

To protect the joints, it was necessary to develop a new protector made of flexible material and at the same time resistant to abrasion. The energy of the impact is distributed within the area and partially absorbed by the protector. Additional energy is absorbed by the Viscofoam layer below it. For the glove to fit properly, the dimensions of this protector correspond to the size of the glove

4SR racing gloves Stingray Race Spec Yellow:

• full leather sport, motorcycle gloves designed for racing use
• The palm and shuttle bone protector is made of 100% stingray skin
• flexible panel to reduce pressure on the joints
• ergonomically shaped palm and fingers for better grip on the handlebars
• the use of external stitching guarantees driving comfort
• the conjoining of the pinky finger and ring finger reduces the risk of injury
• plastic protectors on joints and finger joints for greater safety
• Anti-shock system made of clever Viscofoam® foam on the wrist, joints, ridge, and finger joints ensures the
• distribution of energy during a fall and its subsequent mitigation
• inner lining made of DuPont-Kevlar® Kevlar fabric
• CE according to EU Regulation 2016/425 of the European Parliament and the Council

Once again, we have made progress in development and we are happy to introduce a new model of the best gloves from 4SR. The Stingray Race Spec racing motorcycle gloves have been created with an emphasis on safety and maximum flexibility. 

Riders often prefer comfort and the feel of their fingers in the gloves over high-level protection, but we all know that this is not exactly ideal, and that is why we have focused on joining these conflicting demands.

The fingers controlling the levers have flexible panels built-in at the joint, which do not resist bending and thus enable sensitive touch control of the brakes and clutch. This reduces pressure on the tendons and minimizes the risk of cramps. The entire glove is anatomically pre-closed for better grip on the handlebars. For maximum comfort, external stitching is used.

The edge of the hand is sturdy, equipped with an Antishock system made of Viscofoam material with a memory effect. Because the pinky finger is hit in the vast majority of falls, it is conjoined to the ring finger to increase its protection.

The palm is usually the part of the glove that must resist abrasion well. Kevlar fibers and stingray skins are also used in the area of the palm. That is then backed by Viscofoam memory foam which protects the shuttle bone. The skeleton of the palm, including the fingers, is made of very fine Pittards leather, which is 2x more durable than kangaroo leather.

To protect the joints, it was necessary to develop a new protector made of flexible material and at the same time resistant to abrasion. The energy of the impact is distributed within the area and partially absorbed by the protector. Additional energy is absorbed by the Viscofoam layer below it. For the glove to fit properly, the dimensions of this protector correspond to the size of the glove

4SR racing gloves Stingray Race Spec Camo:

• full leather sport, motorcycle gloves designed for racing use
• The palm and shuttle bone protector is made of 100% stingray skin
• flexible panel to reduce pressure on the joints
• ergonomically shaped palm and fingers for better grip on the handlebars
• the use of external stitching guarantees driving comfort
• the conjoining of the pinky finger and ring finger reduces the risk of injury
• plastic protectors on joints and finger joints for greater safety
• Anti-shock system made of clever Viscofoam® foam on the wrist, joints, ridge, and finger joints ensures the
• distribution of energy during a fall and its subsequent mitigation
• inner lining made of DuPont-Kevlar® Kevlar fabric
• CE according to EU Regulation 2016/425 of the European Parliament and the Council

Once again, we have made progress in development and we are happy to introduce a new model of the best gloves from 4SR. The Stingray Race Spec racing motorcycle gloves have been created with an emphasis on safety and maximum flexibility. 

Riders often prefer comfort and the feel of their fingers in the gloves over high-level protection, but we all know that this is not exactly ideal, and that is why we have focused on joining these conflicting demands.

The fingers controlling the levers have flexible panels built-in at the joint, which do not resist bending and thus enable sensitive touch control of the brakes and clutch. This reduces pressure on the tendons and minimizes the risk of cramps. The entire glove is anatomically pre-closed for better grip on the handlebars. For maximum comfort, external stitching is used.

The edge of the hand is sturdy, equipped with an Antishock system made of Viscofoam material with a memory effect. Because the pinky finger is hit in the vast majority of falls, it is conjoined to the ring finger to increase its protection.

The palm is usually the part of the glove that must resist abrasion well. Kevlar fibers and stingray skins are also used in the area of the palm. That is then backed by Viscofoam memory foam which protects the shuttle bone. The skeleton of the palm, including the fingers, is made of very fine Pittards leather, which is 2x more durable than kangaroo leather.

To protect the joints, it was necessary to develop a new protector made of flexible material and at the same time resistant to abrasion. The energy of the impact is distributed within the area and partially absorbed by the protector. Additional energy is absorbed by the Viscofoam layer below it. For the glove to fit properly, the dimensions of this protector correspond to the size of the glove

4SR racing gloves Stingray Race Spec Blue:

• full leather sport, motorcycle gloves designed for racing use
• The palm and shuttle bone protector is made of 100% stingray skin
• flexible panel to reduce pressure on the joints
• ergonomically shaped palm and fingers for better grip on the handlebars
• the use of external stitching guarantees driving comfort
• the conjoining of the pinky finger and ring finger reduces the risk of injury
• plastic protectors on joints and finger joints for greater safety
• Anti-shock system made of clever Viscofoam® foam on the wrist, joints, ridge, and finger joints ensures the
• distribution of energy during a fall and its subsequent mitigation
• inner lining made of DuPont-Kevlar® Kevlar fabric
• CE according to EU Regulation 2016/425 of the European Parliament and the Council

We are happy to introduce a new model of Sport Cup Gloves! The emphasis as always was on safety, so we went the next level when choosing materials, protectors and creating the pre-curved shape. 

If you want comfortable gloves with protective padding and great fit, Sport Cup 3 will be your favourite pair in your closet! Our Sport Cup 3 Black glove has a pre-curved shape to give the rider a perfect feeling on the handlebars and reduces the problem of blistering hands.

4SR motorbike gloves Sport Cup 3 Black:

• leather sport gloves made of goatskin & cowhide
• precurved sport design
• local perforations between fingers
• ergonomic shape of the fingers ensures better comfort for your hands
• double overlay over the outside of your little finger and ring finger
• plastic joint protector
• Poreten knuckle protectors
• reinforced palms with extreme protective fabric Schoeller®-Keprotec
• double fastening ensures the glove stays in place if you happen to fall
  

We are happy to introduce a new model of Sport Cup Gloves! The emphasis as always was on safety, so we went the next level when choosing materials, protectors and creating the pre-curved shape. 

If you want comfortable gloves with protective padding and great fit, Sport Cup 3 will be your favourite pair in your closet! Our Sport Cup 3 Yellow glove has a pre-curved shape to give the rider a perfect feeling on the handlebars and reduces the problem of blistering hands.

4SR motorbike gloves Sport Cup 3 Yellow:

• leather sport gloves made of goatskin & cowhide
• precurved sport design
• local perforations between fingers
• ergonomic shape of the fingers ensures better comfort for your hands
• double overlay over the outside of your little finger and ring finger
• plastic joint protector
• Poreten knuckle protectors
• reinforced palms with extreme protective fabric Schoeller®-Keprotec
• double fastening ensures the glove stays in place if you happen to fall
  

We are happy to introduce a new model of Sport Cup Gloves! The emphasis as always was on safety, so we went the next level when choosing materials, protectors and creating the pre-curved shape. 

If you want comfortable gloves with protective padding and great fit, Sport Cup 3 will be your favourite pair in your closet! Our Sport Cup 3 Reflex red glove has a pre-curved shape to give the rider a perfect feeling on the handlebars and reduces the problem of blistering hands.

4SR motorbike gloves Sport Cup 3 Reflex red:

• leather sport gloves made of goatskin & cowhide
• precurved sport design
• local perforations between fingers
• ergonomic shape of the fingers ensures better comfort for your hands
• double overlay over the outside of your little finger and ring finger
• plastic joint protector
• Poreten knuckle protectors
• reinforced palms with extreme protective fabric Schoeller®-Keprotec
• double fastening ensures the glove stays in place if you happen to fall
  

Do you want to have summer motorbike gloves which everyone will admire? Then here you are.

The first motorbike gloves created for naked bikes made of soft leather and denim.
Phrase Elegance on motorcycle now gets entirely new dimension. Cafe gloves are available in two colors same as your favourite coffee.

4SR motorbike gloves Cafe Latte:

• leather gloves made of soft goatskin & denim
• precurved shape
• ergonomic shape of the fingers ensures better comfort for your hands
• poreten finger protectors
• knuckle protector
• reinforced palms
• double overlay over the outside of your little finger
• 3D logo

Imagine a perfect day with your motorbike. Beautiful weather, cool ride and exceptionally comfortable gloves.

Motorbike gloves should give a true picture of their owner. That is why we created gloves which fit to your naked bike, streetfighter, cafe racer or bobber bike. Flex panels ensures absolutely free movement and brings unique look of gloves. Simply motorbike gloves for real experts.

4SR motorbike gloves Retro Black:

• short leather gloves made of soft goatskin
• precurved shape
• ergonomic shape of the fingers ensures better comfort for your hands
• reinforced palms
• double overlay over the outside of your little finger
• buttoned latch
• YKK zipper
• 3D logo

Imagine a perfect day with your motorbike. Beautiful weather, cool ride and exceptionally comfortable gloves.

Motorbike gloves should give a true picture of their owner. That is why we created gloves which fit to your naked bike, streetfighter, cafe racer or bobber bike. Flex panels ensures absolutely free movement and brings unique look of gloves. Simply motorbike gloves for real experts.

4SR motorbike gloves Retro:

• short leather gloves made of soft goatskin
• precurved shape
• ergonomic shape of the fingers ensures better comfort for your hands
• reinforced palms
• double overlay over the outside of your little finger
• buttoned latch
• YKK zipper
• 3D logo

Style and comfort are the words that describe each scrambler motorbike and rider. And the same pay for the unique gloves Scrambler by 4SR.

Motorbike gloves created for naked bikes made of soft leather and denim. Carefully cut vintage gloves with quilted details, fit to your naked bike.

4SR motorbike gloves Scrambler Diesel:

• leather gloves made of soft goatskin & denim
• precurved shape
• ergonomic shape of the fingers ensures better comfort for your hands
• poreten finger & knuckle protectors
• local perforations allow ventilation on hot summer days
• reinforced palms
• double overlay over the outside of your little finger
• 3D logo

High-quality & very fine perforated gloves you will love to wear in summer.

Monster EVO gloves has undergone a design evolution. They have an extended cut in the wrist area, palm reinforcement and double leather overlay over the outside of your little finger. You can control your phone's screen using a thumb, which is made of touch screen leather.

4SR fully perforated biker gloves Monster Evo:

• leather gloves made of waxed goatskin
• ergonomic shape of the fingers ensures better comfort for your hands
• thumb is made of touch screen leather
• reinforced palm
• knuckle protectors
• laser made decoration

High-quality & very fine perforated gloves you will love to wear in summer.

Monster Lady EVO gloves has undergone a design evolution. They have an extended cut in the wrist area, palm reinforcement and double leather overlay over the outside of your little finger. You can control your phone's screen using a thumb, which is made of touch screen leather.

4SR fully perforated biker gloves Monster Lady Evo:

• leather gloves made of waxed goatskin
• ergonomic shape of the fingers ensures better comfort for your hands
• thumb is made of touch screen leather
• reinforced palm
• knuckle protectors
• laser made decoration

High-quality & very fine perforated gloves you will love to wear in summer.

Monster EVO gloves has undergone a design evolution. They have an extended cut in the wrist area, palm reinforcement and double leather overlay over the outside of your little finger. You can control your phone's screen using a thumb, which is made of touch screen leather.

4SR fully perforated biker gloves Monster Evo Brown:

• leather gloves made of waxed goatskin
• ergonomic shape of the fingers ensures better comfort for your hands
• thumb is made of touch screen leather
• reinforced palm
• knuckle protectors
• laser made decoration

High-quality & very fine perforated gloves you will love to wear in summer.

Monster Lady EVO gloves brown has undergone a design evolution. They have an extended cut in the wrist area, palm reinforcement and double leather overlay over the outside of your little finger. You can control your phone's screen using a thumb, which is made of touch screen leather.

4SR fully perforated biker gloves Monster Lady Evo brown:

• leather gloves made of waxed goatskin
• ergonomic shape of the fingers ensures better comfort for your hands
• thumb is made of touch screen leather
• reinforced palm
• knuckle protectors
• laser made decoration

an upgrade from our Sport Cup 3, comes with attached pinky and upgraded protection. Great for street riding or on the track.